U-channel edge molding for PC panel mod windows


 

$1.99

Complete your custom PC build, workstation or gaming PC setup with this Mnpctech mouse pad. 3/16" thick fabric, 9.25" x 7.75"

In stock
+

Give holes and windows a professional finish with u-channel.

1/4 wide U-channel molding is easy to install. No glue or tools needed. Covers dangerous sharp edges or
ugly hole cuts. Pricing is 3 feet @ $1.99, 6 feet @ 3.98 and 12 feet @ $8.97

1-120mm fan hole requires 14.5" piece of u-channel

92mm fan hole = 11-1/4" piece of u-channel

80mm fan hole = 9.5" piece of u-channel

Dimensions of U-channel:

Inside: Width = 1/32", Height = 5/32"

Outside: Width = 7/64", Height = 7/32"






Enter name, address, and email below for a chance to win this Black Reference GPU Support Arm Bracket by Mnpctech One Random Winner will be emailed Tracking on 2/24/17. Mnpctech Black Machined Aluminum GPU Support Arm and Cooling Fan Hanger Bracket can be used with Reference Air Cooler video cards or video cards with water cooling blocks.


OPEN TO ALL COUNTRIES!!



Mnpctech GPU cooling fan hanger allows you to direct airflow onto single GPU or video cards in Crossfire and SLI. It can also direct air onto areas of your motherboard, like your VRAM, AMD RYZEN or INTEL processors, DDR memory slots, and your north and south bridge chip sets. Mnpctech's GPU cooling fan hanger is Made in the USA by a family owned workshop in Minnesota. It's cnc machined from 1/8" thick 6061 aluminum and anodized.


You can mount these different PC cooling fan sizes with Mnpctech Cooling Fan Bracket, One or two 80mm fans. One or two 120mm fans. One 140mm fan.



 

Type the characters you see in the picture above.

Comments

заказать продвижение интернет ресурса логин скайпа pokras7777