Phanteks Enthoo Primo case front grill overlay

Phanteks Primo Front Grill


 

$22.99

Phanteks Enthoo Primo case front grill overlay Steampunk
Out of stock

Mnpctech 240 radiator grills are laser cut from Black 1/8" thick case acrylic and can be used as custom grill overlay on Phanteks Enthoo Primo case.

3 design styles to chose, Honeycomb, Slotted, and Steampunk

You can flip grill to Mnpctech logo or non-logo side.

Grill includes 8x Black 8/32" thread x 5/8" long socket head screws with nuts.

You must drill mounting holes into the Enthoo Primo factory grill. Use #29 or 7/64 size drill bit.

Here are the step by step instructions for installing Mnpctech 240 grill onto the Phenteks Enthoo Primo front mesh grill.

There is two different ways to modify and install the Mnpctech 240 grill onto your Phanteks Enthoo Primo. You have choice to drill four or eight mounting holes for the 240 grill. Four in each corner of the grill or eight in all eight mounting holes. You can either drill the mounting holes with the mesh grill installed or remove the mesh grill before drilling the holes.

First way is drilling the mounting with the Black mesh grill installed in the front bezel.

You can drill either four or eight mounting holes into the Enthoo Primo factory grill. Use #29 or 7/64 size drill bit.

Here is alternative way to drill the black mesh grill. You can remove the front Enthoo Primo mesh intake grill, before drilling the holes.