Music Hall mmf-1.3 mmf-1.5 Audiophile Turntable Sorbothane Isolation Feet (Set of 4)

Music Hall mmf-1.3 mmf-1.5 Audiophile Turntable Sorbothane Isolation Feet (Set of 4)


 

$69.99

4 item(s)
+

Installation requires drilling four holes.

To install, remove the mmf-1.3 factory feet, measure for center and drill four center pilot holes with 5/64 drill bit.

Tighten the #10 screws to the point where you can still effortlessly rotate the feet by hand. This way the load of the turntable transfers through the feet.

Replace your Music Hall mmf-1.3 mmf-1.5 Audiophile Turntable Vinyl Record Player stock feet with our custom machined aluminum replacement feet. Our custom feet replace Music Hall Turntable models that include mmf-1.3 mmf-1.5 turntables. Mnpctech makes these machined aluminum for customizing your Music Hall mmf-1.3 mmf-1.5 Audiophile Turntable.

Each Music hall Audiophile turntable foot measures 1-1/2" tall (38.1mm) x 1-3/4" O.D (44.45mm) with machined 6061 grade aluminum shell.

Music Hall mmf-1.3 mmf-1.5 Audiophile Turntable Sorbothane Isolation Feet by Mnpctech has 3/16" thick vibration top isolating pad.

Each Music Hall mmf-1.3 mmf-1.5 Audiophile Turntable Sorbothane Isolation Feet Includes #10 size wood screw to bite into the existing screw holes. Each screw is 1-3/4" length.

These custom aftermarket feet are not made by Music Hall Turntables.
















Enter name, address, and email below for your chance to win

Mnpctech Machined Aircraft Aluminum GPU Support.

Fits all GPU Brands and Models, including GPU Waterblocks.

(Video card in photos not included)

One Random Winner will be emailed Tracking on 7/26/19. OPEN TO ALL COUNTRIES!!

Mnpctech has created an limited edition aircraft aluminum GPU support bracket. Works with all model GPU computer video cards. Aircraft allows us to make a design that is very sleek and simple without concern about the structural support strength. Nobody wants their high performance Nvidia or Radeon GPU to be sagging. It's a real problem for some video card manufacturers. You can protect your investment and avoid a sagging video card with the Mnpctech GPU support bracket bar. Mnpctech GPU support brackets are cnc machined from 1/8" thick 6061 aircraft aluminum. Mounting the Mnpctech GPU support bracket requires two open PCI slots below the GPU. Supports single GPU setup only.

Measures 12.5" long by 3/4" wide.

Aircraft Aluminum GPU support by Mnpctech bracket includes:

1x Machined aluminum height adjustable GPU support bracket brace with two 6/32 flat head PCI slot mounting screws.

1x Machined aluminum adjustable pedestal with Black rubber cushion with two 6/32 screws pre-installed.