Music Hall IKURA Black Audiophile Turntable Sorbothane Isolation Feet (Set of 3)
Set of Three Feet.
Installation requires drilling four holes.
To install, remove the Music Hall IKURA Turntable factory feet, measure for center and drill four center pilot holes with 5/64 drill bit.
Tighten the three included #10 screws to the point where you can still effortlessly rotate the feet by hand. This way the load of the turntable transfers through the feet.
Replace your Music Hall IKURA Audiophile Turntable Vinyl Record Player stock feet with our custom machined aluminum replacement feet. Our custom feet replace Music Hall Turntable models that include mmf-1.3 mmf-1.5 turntables. Mnpctech makes these machined aluminum for customizing your Music Hall IKURA Audiophile Turntable.
Each Music hall Audiophile turntable foot measures 1-1/2" tall (38.1mm) x 1-3/4" O.D (44.45mm) with machined 6061 grade aluminum shell.
Music Hall IKURA Audiophile Turntable Sorbothane Isolation Feet by Mnpctech has 3/16" thick vibration top isolating pad.
Each Music Hall IKURA Audiophile Turntable Sorbothane Isolation Feet Includes #10 size wood screw to bite into the existing screw holes. Each screw is 1-3/4" length.
These custom aftermarket feet are not made by Music Hall Turntables.