Brian Hancock's Acoustic Research XB Vintage Turntable with Mnpctech Isolation Feet

AR Acoustic Research XB Audiophile Turntable Isolation Feet (Set of 4)


 

$69.99

4 item(s)
+

Installation requires drilling four holes.

To install, remove your Acoustic Research AR XB feet, measure for center and drill four center pilot holes with 5/64 drill bit.

Tighten the #10 screws to the point where you can still effortlessly rotate the feet by hand. This way the load of the turntable transfers through the feet.

Replace your Acoustic Research XB Audiophile Turntable Vinyl Record Player stock feet with our custom machined aluminum replacement feet. Mnpctech makes these machined aluminum for customizing your Acoustic Research XB Audiophile Turntable.

Acoustic Research XB Audiophile turntable foot measures 1-1/2" tall (38.1mm) x 1-3/4" O.D (44.45mm) with machined 6061 grade aluminum shell.

Acoustic Research XB Audiophile Turntable Sorbothane Isolation Feet by Mnpctech has 3/16" thick vibration top isolating pad.

Each Acoustic Research XB Vintage Analog Audiophile Turntable Sorbothane Isolation Feet Includes #10 size wood screw to bite into the existing screw holes. Each screw is 1-3/4" length.

These custom aftermarket feet are not made by Acoustic Research.



Brian Hancock's Acoustic Research XB Vintage Turntable with Mnpctech Isolation Feet


Brian Hancock's Acoustic Research XB Vintage Turntable with Mnpctech Isolation Feet










Enter name, address, and email below for your chance to win

Mnpctech LE Machined Aircraft Aluminum GPU Support

Fits all GPU Brands and Models, including GPU Waterblocks.

One Random Winner will be emailed Tracking on 3/29/19. OPEN TO ALL COUNTRIES!!

Mnpctech has created an limited edition aircraft aluminum GPU support bracket. Works with all model GPU computer video cards. Aircraft allows us to make a design that is very sleek and simple without concern about the structural support strength. Nobody wants their high performance Nvidia or Radeon GPU to be sagging. It's a real problem for some video card manufacturers. You can protect your investment and avoid a sagging video card with the Mnpctech GPU support bracket bar. Mnpctech GPU support brackets are cnc machined from 1/8" thick 6061 aircraft aluminum. Mounting the Mnpctech GPU support bracket requires two open PCI slots below the GPU. Supports single GPU setup only.

Measures 12.5" long by 3/4" wide.

Aircraft Aluminum GPU support by Mnpctech bracket includes:

1x Machined aluminum height adjustable GPU support bracket brace with two 6/32 flat head PCI slot mounting screws.

1x Machined aluminum adjustable pedestal with Black rubber cushion with two 6/32 screws pre-installed.


The Limited Edition Aircraft Aluminum GPU support bracket works with all manufacturer video card models including reference, non-reference and video cards with GPU water blocks.

Mnpctech "Limited-Edition" Aircraft Aluminum GPU support bracket includes:

1x Aircraft Aluminum bracket with angle slots for height adjustment of the bumper cushion.

2x 6/32 thread flat head PCI slot mounting screws.

1x Aircraft aluminum adjustable pedestal with Black rubber cushion with two 6/32 screws pre-installed.