120mm Turbine PC Cooling Fan with Polished aluminum nose that protrudes 1.50"
Includes: Wire safety guard to protect you from fan blades. 3 pin power connectionPolished aluminum frame fan measures 122mm x 122mmPlastic fan blades Ball bearing rpm monitoring 2000 rpm 79.4 cfm 30 dBA
*ALUMINUM FANS WILL NOT FIT ANY PC RADIATORS
Build your own 120mm Turbine Fan Mod and Combine 120mm Overkill Turbine PC Fans with Mnpctech's "Overkill Rings" for Jet engine style intakes on your Custom Gaming or Overclocked PC Build.
Mnpctech's 120mm Overkill Ring is cnc milled from 1/2" thick 6061 aluminum.
The frame is milled from aluminum and then polished. The fan blades are plastic with chrome plating. The center spinner is added by Mnpctech. It's hollow and constructed from light weight cast aluminum. It protrudes 1.5". The Turbine fan includes 3 pin power connection with rpm monitoring. It includes chrome plated wire fan guard (not pictured). These 120mm Turbine fans are rated at 2000 rpm and produces 79.4 cfm @ 30 dBA
The Turbine fans are sold with protective wire fan guards, not shown. You can use the 120mm Overkill Fan "Ring" with any 120mm size cooling fan. You can mount the rings on the front bezel of a computer case bezel like we've done. Another option is covering an exhaust fan located in your top or 120mm gpu cooling fans your side panel. Just use your imagination!
Mnpctech has created an limited edition aircraft aluminum GPU support bracket. Works with all model GPU computer video cards. Aircraft allows us to make a design that is very sleek and simple without concern about the structural support strength. Nobody wants their high performance Nvidia or Radeon GPU to be sagging. It's a real problem for some video card manufacturers. You can protect your investment and avoid a sagging video card with the Mnpctech GPU support bracket bar. Mnpctech GPU support brackets are cnc machined from 1/8" thick 6061 aircraft aluminum. Mounting the Mnpctech GPU support bracket requires two open PCI slots below the GPU. Supports single GPU setup only.
1x Machined aluminum height adjustable GPU support bracket brace with two 6/32 flat head PCI slot mounting screws.
1x Machined aluminum adjustable pedestal with Black rubber cushion with two 6/32 screws pre-installed.
The Mnpctech Black Limited Edition Aircraft Aluminum ANTI-SAG GPU support bracket works with all manufacturer video card models including reference, non-reference and video cards with GPU water blocks.
1x Black Aircraft Aluminum bracket with angle slots for height adjustment of the bumper cushion.
2x Black 6/32 thread flat head PCI slot mounting screws.
1x Black Anti Sag Aircraft aluminum adjustable pedestal with Black rubber cushion with two 6/32 screws pre-installed.
Close up of the GPU support bumper on Mnpctech GPU support bracket.
The GPU support arm bracket is cnc machined from 1/8" thick aluminum and anodized with Black finish.
Mnpctech new GPU support bracket arm works with all versions of video cards on the market today.
View of the backside of Mnpctech's new GPU support bracket to prevent sag in your video card.