This is EZDIY PCI-E 16x Riser card with black EMI shielding. It has a 4 layer PCB board design with strong solder points and gold plated contacts for optimal connectivity. These riser cables made by EZ DIY can be used in any case or scratch built PC that needs the graphics card moved away from the motherboard. The black EMI shielding will have slight wrinkles as shown in the photos published on this page. EZDIY-FAB New PCI Express PCIe3.0 16x Flexible Cable Card Extension Port Adapter High Speed Riser Card measures 25cm or 9.84".
|Length||25 centimeters / 9.84"|
|Interface||PCI Express 16X|
EZDIY-FAB New PCI Express PCIe3.0 16x Flexible Cable Card Extension Port Adapter High Speed Riser Card (25cm)
Mnpctech Modder, Bill Owen uses EZDIY 16x PCI-Express riser cables in his custom PC builds
EZDIY PCI Express x16 riser cable installed in Corsair 600c chassis with Mnpctech Vertical GPU bracket mount.
EZDIY-FAB New PCI Express PCIe3.0 16x Flexible Cable Card Extension Cable High Speed Riser Card (25cm)
EZDIY PCI Express PCIe3.0 16x Flexible Cable Card Extension Port Adapter High Speed Riser Card (25cm)
Mnpctech has created an limited edition aircraft aluminum GPU support bracket. Works with all model GPU computer video cards. Aircraft allows us to make a design that is very sleek and simple without concern about the structural support strength. Nobody wants their high performance Nvidia or Radeon GPU to be sagging. It's a real problem for some video card manufacturers. You can protect your investment and avoid a sagging video card with the Mnpctech GPU support bracket bar. Mnpctech GPU support brackets are cnc machined from 1/8" thick 6061 aircraft aluminum. Mounting the Mnpctech GPU support bracket requires two open PCI slots below the GPU. Supports single GPU setup only.
1x Machined aluminum height adjustable GPU support bracket brace with two 6/32 flat head PCI slot mounting screws.
1x Machined aluminum adjustable pedestal with Black rubber cushion with two 6/32 screws pre-installed.
The Mnpctech Black Limited Edition Aircraft Aluminum ANTI-SAG GPU support bracket works with all manufacturer video card models including reference, non-reference and video cards with GPU water blocks.
1x Black Aircraft Aluminum bracket with angle slots for height adjustment of the bumper cushion.
2x Black 6/32 thread flat head PCI slot mounting screws.
1x Black Anti Sag Aircraft aluminum adjustable pedestal with Black rubber cushion with two 6/32 screws pre-installed.
Close up of the GPU support bumper on Mnpctech GPU support bracket.
The GPU support arm bracket is cnc machined from 1/8" thick aluminum and anodized with Black finish.
Mnpctech new GPU support bracket arm works with all versions of video cards on the market today.
View of the backside of Mnpctech's new GPU support bracket to prevent sag in your video card.