This is a "One-Off" Corsair 230T Mid Tower Case Mod with Mnpctech PC & Case Modding products.
No Returns, Exchanges or Refunds accepted on "one-off" case mods.
Included Case Mods:
2x Tribal Skull grills installed
1x set of Black Anodized Diamond knurl machined case feet
1x Corsair SP-120mm fan, custom painted.
1x 120mm Black Overkill Fan Ring
4x Black Anodized Diamond Knurl PC Case Thumbscrews
8x M3 "Screw'd anodized gold washers with black radiator or fan fasteners
2x Corsair 120mm factory fans (specs unknown)
Factory case features:
Dual 120mm front LED fans and rear 120mm exhaust fan.
USB 3.0 front panel
Tool-free SSD, HDD, and ODD installation
Cable routing and CPU cooler backplate motherboard cutouts
Seven PCIe slots with thumbscrews and room for GPUs 320mm long
Install up to four 3.5" and four 2.5" drives simultaneously tool free.
Up to six fan mounts for optimal cooling potential
Dust filters for front and PSU intake.
Room for up to 200mm ATX PSU (not included)
Corsair 230T Mid Tower we've titled The "HELLFIRE" Case Mod. This unique Orange Corsair 230T case will be utilizing several different case mod products from Mnpctech's PC Case Mod Store.
The Corsair 230T Mid Tower case will include a set of four machined aluminum Black anodized PC thumbscrews for the side panels for only .99 each, SOLD HERE
The first case modification will be modifying and installing this Mnpctech 240 Tribal Skull PC Fan or radiator grill.
2.120mm / 2x 120mm / 240 Tribal Skull PC Cooling Radiator or Fan grill. This grill is laser cut from 1/8" thick, Black cast acrylic and fits all radiators with 15mm spacing, SOLD HERE
2nd case mod stage is installing four Billet CNC Machined Aluminum "Diamond Knurl" Case Feet made by Mnpctech. Thick hard rubber foot insert helps prevent vibration and protect your desk or work station.
Base Diameter = 1- 3/4", Height = 1"
4, billet machined aluminum covers,
4, thick rubber feet,
4, nuts & bolts.
These case feet are available in a Silver or Black anodized finish which is similar to factory finish on Antec, Azza, Cooler Master, Corsair, Lian Li, Phanteks, Rosewill, Silverstone, Thermaltake, Cases.
Mnpctech "Diamond Knurl" PC Case feet.
13/64" drill bit used for making mounting holes for fasteners included with the diamond knurl case feet.
Corsair 230T Mid Tower Case Mod with Mnpctech Black "Diamond Knurl" PC Case feet and Tribal Skull Grill
2.120mm / 2x 120mm / 240 Tribal Skull PC Cooling Radiator or Fan grill. This grill is laser cut from 1/8" thick, Black cast acrylic and fits all radiators with 15mm spacing,
The rear exhaust fan will be re-painted Orange and Silver Aluminum
CNC Machined 120mm Overkill Fan Grill Ring by Mnpctech
PC Cooling Fan Mounting Screws by Mnpctech
Mnpctech has created an limited edition aircraft aluminum GPU support bracket. Works with all model GPU computer video cards. Aircraft allows us to make a design that is very sleek and simple without concern about the structural support strength. Nobody wants their high performance Nvidia or Radeon GPU to be sagging. It's a real problem for some video card manufacturers. You can protect your investment and avoid a sagging video card with the Mnpctech GPU support bracket bar. Mnpctech GPU support brackets are cnc machined from 1/8" thick 6061 aircraft aluminum. Mounting the Mnpctech GPU support bracket requires two open PCI slots below the GPU. Supports single GPU setup only.
1x Machined aluminum height adjustable GPU support bracket brace with two 6/32 flat head PCI slot mounting screws.
1x Machined aluminum adjustable pedestal with Black rubber cushion with two 6/32 screws pre-installed.
The Mnpctech Black Limited Edition Aircraft Aluminum ANTI-SAG GPU support bracket works with all manufacturer video card models including reference, non-reference and video cards with GPU water blocks.
1x Black Aircraft Aluminum bracket with angle slots for height adjustment of the bumper cushion.
2x Black 6/32 thread flat head PCI slot mounting screws.
1x Black Anti Sag Aircraft aluminum adjustable pedestal with Black rubber cushion with two 6/32 screws pre-installed.
Close up of the GPU support bumper on Mnpctech GPU support bracket.
The GPU support arm bracket is cnc machined from 1/8" thick aluminum and anodized with Black finish.
Mnpctech new GPU support bracket arm works with all versions of video cards on the market today.
View of the backside of Mnpctech's new GPU support bracket to prevent sag in your video card.