This Mnpctech carbon fiber sheet is 3K Twill design with a glossy finish. These carbon fiber composite material sheets measure 3mm thick by 300mm long by 150mm wide. (11-7-8" x 11-7-8" x 1/8")
Please note that carbon fiber and fiberglass dust is not toxic, but it is a mild irritant to your skin, eyes, and lungs. Mnpctech strongly recommends that you wear a dust mask and eye protection to help minimize any itching or irritation when cutting, etching or sanding our rigid carbon fiber sheets, this is why we offer you the option on this page to add a dust mask and safety glasses along with your sheets.
Carbon Fiber rigid composite sheets from Mnpctech are great for your Maker projects. It's very strong while being very easy to cut or drill.
You can cut these sheets yourself with shop tools that include handheld jigsaw, vertical saw, table saw, and band saw. We've seen customers use our carbon fiber composite sheets for making SSD covers, 3.5" or 5.25" PC optical drive bay or front bezel covers. 3K Twill carbon fiber Video card (GPU) back plate covers would look really cool. Another cool mod would be creating carbon fiber accent plates for your AMD, ASROCK, ASUS, ASUS ROG, GIGABYTE, INTEL and MSI PC motherboard. Your customizing with carbon fiber doesn't have to end with PCs. You could also modify your PS4 pro or Xbox One S with real carbon fiber accents.
The Carbon fiber sheet will arrive with protective plastic back you can peel off.
Here is one of the many ideas you can do with our 3mm carbon fiber sheets. Bill attached the carbon fiber to EK waterblock for Gigabyte 1080.
(Video card in photos not included)
Mnpctech has created an limited edition aircraft aluminum GPU support bracket. Works with all model GPU computer video cards. Aircraft allows us to make a design that is very sleek and simple without concern about the structural support strength. Nobody wants their high performance Nvidia or Radeon GPU to be sagging. It's a real problem for some video card manufacturers. You can protect your investment and avoid a sagging video card with the Mnpctech GPU support bracket bar. Mnpctech GPU support brackets are cnc machined from 1/8" thick 6061 aircraft aluminum. Mounting the Mnpctech GPU support bracket requires two open PCI slots below the GPU. Supports single GPU setup only.
1x Machined aluminum height adjustable GPU support bracket brace with two 6/32 flat head PCI slot mounting screws.
1x Machined aluminum adjustable pedestal with Black rubber cushion with two 6/32 screws pre-installed.